How to Install a Truck Toolbox Without Drilling

A truck you have or you who intend to know how to install a truck toolbox without drilling, right? Let us assure you that you’re thinking it right. The point is, a truck toolbox is just the right thing for a protected storage unit that would perform all the functionalities right without damaging the uprightness of your vehicle.

With the uphill curve of car ownership, more and more people realize the importance of having a toolbox in their vehicle. But not many people are willing to take professional services and all the complexities that come along with it. Also, they’re concerned about the well-being of their truck bed.

Hence, it accelerates the necessity of mounting a truck toolbox without the hassle of drilling or any other mechanical complexities.

There are a few aspects that you need to be well aware of before mounting a toolbox in your truck. First thing first, it has to be comfortable and convenient to install. Then, once the box has been mounted, make sure it remains safe and well secured. Thirdly, no damage should be done to the body of the truck in the process of installing the toolbox. Finally, ensure the durability of the box for long-lasting usage.

So, let’s just dig into the several aspects one by one.

1. Know What’s Required

You’ll need some hardware to finish this installation process. Screws, bolts, and nuts, yes, the obvious ones! Work gloves are necessary for your safety, so is thick protective clothing. Gather cordless drill or screwdrivers, and an open-ended wrench. You’ll also need foam padding strips at some point.

2. Choose the Right Toolbox

There are different types of toolboxes in the market that vary in the application. Here the matter to consider is the accommodation of all your necessary tools in the box without wasting too much space.

Boxes made of Stainless steel should be prioritized for your toolbox. Then decide whether you need a crossover toolbox, side toolbox, or the fifth-wheel type. These are different in size as well as the place of installation.

3. Get the Ideal Location

Now comes the crucial question, where do you intend to install the toolbox. Based on the type of toolkit you’ve selected, the crossover toolbox is usually placed across the width of the cargo bed. The side toolbox is mounted along the length. And, the fifth-wheel is mainly a type which can be placed in any convenient position as they’re small in size.

Apart from the type of toolbox, it is necessary to ensure that the lid of the box can be opened quickly, and the cross rails should not be an obstruction. But one thing you must do is to get the perfect measurement of the ideal location as well as the toolbox itself.

4. Measurement is the Key

After getting the ideal location, now measurement is absolutely pivotal. We’d recommend you to use a measuring tape to measure the width, length, and height of your purchased box to match against the intended location of installation. Do not make the mistake of mounting toolbox without proper measurement being ensured.

5. The Foam Padding

Even if you use a good quality tool bag or tool belt, there’s no way to deny the fact that the toolbox might still damage the cargo bays. So, it is essential to cover the bottom as well as the side of the cargo body with foam padding.

That being the case, use foam strips for the padding purpose before you start the mounting process. So, get the required measurement and began with attaching foam padding.

6. Anchor the Box

Now comes the essential and critical part of the installation process, as it is the actual installation process. Align the box with the pre-drilled holes that come in-built with the cargo.

If you’re using plastic made toolbox, it’s a lot easier as you’ll find holes for nuts and bolts. But since we’ve suggested you use a metal-made box, you need to be well equipped with necessary hardware. Usually, metal-made toolboxes are mounted with J-bolt. The J-bolt will be attached to the holes drilled with the drill press.

7. Fit the Hooks and Bolt Types

It’s a part of the anchoring or mounting process. Usually, you’ll need more than 4 to 6 J-hooks and bolts to make the toolbox well protected. Slip the J-hooks according to the size and type of the toolkit you’re using.

Also, take note that foam padding is aligned correctly with your actual toolbox and all the used bolts and nuts. Surely you don’t want the sound of moving toolbox to irritate you while you’re on the roads.

8. Tighten and Re-confirm the Installation

An open-ended wrench you have to use or spanner to tighten the box. Don’t put an excessive amount of pressure as it might hamper the bed rails. However, you don’t want to put way too little pressure, as that might result in unwanted vibrations.

And then, re-confirming the installation process, try to open up the lid once you’re done with the mounting process. If it’s not of too much inconvenience, then it has been done right. Shake it up a bit to test the looseness and vibration of the box. 

Additional Tips

Now comes some other tips that will get you rid of some extra burdens. Ensure the usage of heavy-duty stainless steel for the J-hooks. Using a type of special bolt that has the support of nuts resembling aluminum blocks for hooking to the rails. To safeguard against the rough terrains and vibrations, you might use Loctite.

This will ensure the joints are neither too tight or too loose. Apart from these, use rubber-coated foam strips for padding. This will ensure durability.


So, how to install a truck toolbox without drilling, it’s not a difficult thing to do. But if you’re a first-timer in this particular thing, you’ll need some carefulness. We hope this how-to article of ours has helped you with the needed information. One last note we’ll like you to take, always maintain proper pressure while you mount the toolbox in your truck without the hassle of drilling.

So, without further ado, let’s jump straight into the action. Start your toolbox installation right away.

We think you’re also going to find these pages:

Leave a Comment